sahng-gyu park

1. Communauté
2. Ixxat - Embedded Control
3. usb.core.USBTimeoutError: [Errno 110] Operation timed out

Hi Peter,   The problem has been solved now. I checked the bitrate of force sensor connected to the USB-to-CAN v2 adapter by using oscilloscope and it was 1MHz. I tried to change adapter's bitrate ...

• Afficher le commentaire
• sahng-gyu park
• 12 septembre 2024 10:51
• 0 vote

1. Communauté
2. Ixxat - Embedded Control
3. usb.core.USBTimeoutError: [Errno 110] Operation timed out

Hi Peter,   I connected two USB-to-CAN v2 adapters to PC and wired CAN-High and CAN-Low pins together between two DB9 connectors to make loopback path and tested the loopback message's sending and ...

• Afficher le commentaire
• sahng-gyu park
• 11 septembre 2024 09:20
• 0 vote

1. Communauté
2. Ixxat - Embedded Control
3. usb.core.USBTimeoutError: [Errno 110] Operation timed out

Hi Peter, Thank you again for your replies. I followed your instruction to install socketCan. I got the following results after the installation. $ip a 5: can0: <NOARP,ECHO> mtu 16 qdisc noop state...

• Afficher le commentaire
• sahng-gyu park
• 6 septembre 2024 11:21
• 0 vote

1. Communauté
2. Ixxat - Embedded Control
3. usb.core.USBTimeoutError: [Errno 110] Operation timed out

Hi again, Your link for SocketCAN driver leads to 'Support and downloads page' in your homepage. I downloaded 'SocketCAN Driver for Linux' in the drivers page. The size of the downloaded file 'sock...

• Afficher le commentaire
• sahng-gyu park
• 6 septembre 2024 06:12
• 0 vote

1. Communauté
2. Ixxat - Embedded Control
3. usb.core.USBTimeoutError: [Errno 110] Operation timed out

Hi Peter, Thank you for your quick reply. A tactile sensor is connected to the USB-to-CAN v2 adapter and the adapter is connected to USB port in PC. What I want to do is to read data from the tacti...

• Afficher le commentaire
• sahng-gyu park
• 6 septembre 2024 00:40
• 0 vote