Sandi
- Activité totale 8
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 1
Aperçu des activités
Dernière activité effectuée par Sandi-
Sandi a ajouté un commentaire,
Hi Andrew, Thanks for your email. Yes, you are correct. We have a RJ 485 port/ connection available on the Combox and we intend to use that to achieve the communication via (a gateway suggested by ...
-
Sandi a ajouté un commentaire,
Hi Kyle, Yes you are right, the Anybus should ideally be able to interface with the Modbus RS-485 port ( first preference) or the Ethernet port( which supports Modbus communication) on the Combox. ...
-
Sandi a ajouté un commentaire,
Kyle, Thanks for your response. And yes, we might need some information on the Modbus port on Schneider's Combox, specifically we want to know if it can/does broadcast any message on receiving a co...
-
Sandi a ajouté un commentaire,
Hi Kyle, Just wanted to follow up and see if you had any questions or any information of a product you think might be suitable for our application. Any information you can provide, will be very hel...
-
Sandi a ajouté un commentaire,
Hi Kyle, I spoke to the generator manufacturer (Cummins) and was able to get hold of their manual. Please find the same attached. If it still doesn't answer all your questions, please do let me kn...
-
Sandi a ajouté un commentaire,
Hi Kyle, The combox has options for serial communication ( RS-485) and Ethernet. The Auto Generator Start (AGS) component of our system is tied to the XANBUS network within other Schneider Electric...
-
Sandi a créé une publication,
Schneider Conext XW/ SCP/Combox/ AGS compatibility with CAN Communicator
We have a Schneider Conext XW inverter system configured with Schneider DAC system ( System Control Panel, COMBOX, Automatic Generator Start) that uses XANBUS and MODBUS. Our customer would like to...