David_Nolan
- Activité totale 11
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 2
Aperçu des activités
Dernière activité effectuée par David_Nolan-
David_Nolan a ajouté un commentaire,
Thanks! You guys never let me down!
-
David_Nolan a ajouté un commentaire,
I'm not sure we are both on the same page regarding this problem: I am not using Ignition, but rather a Unified Automation .NET library, and and was looking more for insight into how the UA server...
-
David_Nolan a ajouté un commentaire,
the IP field in the certificate properties is 10.0.0.253. the actual IP address is the one shown in my above screenshot. the UA expert client actually connects and i can read data. so the certifica...
-
David_Nolan a créé une publication,
OPCUA Certificate Error
OK, so i am trying to connect to the OPC UA server using UA Expert. I have the server in certificate mode on the Ewon. i am ultimately able to connect to the server, but only if i ignore the below ...
-
David_Nolan a ajouté un commentaire,
eWON TAG GENERATOR REV 6.xlsm (41.9 KB) Here is the one I am using.
-
David_Nolan a ajouté un commentaire,
Tom, In your GENERATOR REV 5 workbook, just remove column K (the "Type" column). Then, insert two columns after BA ("FCO"), and call them "KPI", and "Type". I was able to use the generator against ...
-
David_Nolan a ajouté un commentaire,
Deryck, I was able to get it working. Because firmware 13.2 adds a column to var lst for the KPI property, and moves the "Type" column to a different location in the table, the current tag generato...
-
David_Nolan a ajouté un commentaire,
Edit: I was able to get it working, and have described the solution below.
-
David_Nolan a ajouté un commentaire,
I think there is a problem using this tag generator workbook with flexy firmware version 13.2PR. I have used it successfully in firmware 13.0, but it appears the column format of the var file chang...