jseanor

1. Communauté
2. Ewon
3. Rockwell Transfer Utility

@mareimers Glad it is working for you! Please let us know if you have any further isuses.  

• Afficher le commentaire
• jseanor
• 28 septembre 2018 19:03
• 0 vote

1. Communauté
2. Ewon
3. Rockwell Transfer Utility

@mareimers In order to establish this connection you need to add the device explicitly inside of FactoryTalk View Studio. Once inside of View Studio, you will want to navigate to the connection set...

• Afficher le commentaire
• jseanor
• 28 septembre 2018 13:35
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Why does onchange in init section doesn't work?

@Massimo_Borroni You simply have a syntax error in your onchange. Inside of the onchange you are passing a reference to the tag value (specified by the @ symbol) but not the actual tag address. Whe...

• Afficher le commentaire
• jseanor
• 17 septembre 2018 12:43
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

@mitchell.hein Yes, that would as that is the domain used to test that as well.  

• Afficher le commentaire
• jseanor
• 5 septembre 2018 14:39
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

@mitchell.hein That is strange, does the unit still pass the Talk2M wizard? What if you set Google DNS, does that help with the 2nd internet test?  

• Afficher le commentaire
• jseanor
• 5 septembre 2018 13:36
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

@mitchell.hein In the internet setup wizard, is it passing one step and not the other? So does it pass establishing WAN connection and fail on test internet connection?  

• Afficher le commentaire
• jseanor
• 5 septembre 2018 12:58
• 0 vote

1. Communauté
2. Ewon - Cosy
3. Cosy 131 Wan-Lan same Ip range

/u/jondup Unfortunately there are not too many ways to get around this issue. You only have 2 options available to you. Change the eWON LAN This option would require you to change the LAN IP addr...

• Afficher le commentaire
• jseanor
• 23 août 2018 15:08
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Is there an issue with the LAN and WAN being in the same network?

@timon This is actually not going to work. By configuring both networks in the same network you are creating a network conflict. One of the few requirements for using an eWON are two very distinct ...

• Afficher le commentaire
• jseanor
• 3 janvier 2018 13:36
• 0 vote

1. Communauté
2. Ewon - Flexy
3. How to share data between 2x Flexy

@Simon_hms, There are actually several different ways to accomplish this with each varying in complexity or use case. M2Web API & REQUESTHTTPX With the addition of the RequestHTTPX BASIC command in...

• Afficher le commentaire
• jseanor
• 4 août 2017 14:03
• 1 vote