Franziska Gültig

1. Communauté
2. Ewon - Netbiter
3. Argos Dashboard Widget Log Graph to show all logged values not only hourly

Hi Zala! How often a Value gets logged depends on your settings. Minium Log interval is one minute (in some special cases maybe a little bit faster) but this eat's your 'storage time' so the faster...

• Afficher le commentaire
• Franziska Gültig
• 11 août 2025 10:18
• 0 vote

1. Communauté
2. Ewon
3. One Ewon for multiple LAN

Hi Leszek!  What is your intent with that? The Ewon Solution (Cosy Flexy Netbiter) works best with only 1 LAN network... but if you have a Flexy there are way's around that. In the Flexy you need t...

• Afficher le commentaire
• Franziska Gültig
• 11 août 2025 10:06
• 0 vote

1. Communauté
2. Anybus - Diagnostics
3. Atlas2 and Ethertap network diagnostic

Hi Joned! I talked with a few of my collegues about your questions since I'm not an expert for the Anybus Diagnostic Products. For Profinet 100mbps should be enough, Ethernet/IP might do more than ...

• Afficher le commentaire
• Franziska Gültig
• 21 mai 2025 09:42
• 1 vote

1. Communauté
2. Intesis - AC Interfaces
3. FUJITSU Indoor Unit Overwriting KNX setpoint automatically

Hi! in the ticket this was the result: We noticed that the problem occurs when the AC Setpoint is calculated lower than the minimum Set point accepted by the Fujitsu. This is due to the Ambient tem...

• Afficher le commentaire
• Franziska Gültig
• 7 mai 2025 11:20
• 0 vote

1. Communauté
2. Ewon - Talk2M
3. Update from Windows 10 to Windows 11 - Cannot find Talk2m VPN Service

Hi Justin! Sorry didn't see the picture! Try this if it is not the Tap adapter itself it might be a problem connecting to it: What to do if you face the error "Talk2m VPN Service cannot be found" w...

• Afficher le commentaire
• Franziska Gültig
• 24 avril 2025 11:15
• 0 vote

1. Communauté
2. Ewon - Talk2M
3. Update from Windows 10 to Windows 11 - Cannot find Talk2m VPN Service

Hi Justin! Do if you check your Network Connections, if there is an existing Tap Adapter named "Talk2m-eCatcher". You can find that by going to Network and Internet Settings> Change adapter options...

• Afficher le commentaire
• Franziska Gültig
• 17 avril 2025 10:45
• 0 vote

1. Communauté
2. Ewon - Cosy
3. HMI in WAN erreichen

Hi Cedric! The Profinet Explorer communicates on a Mac layer that can not be routed (Only IP layer is routed) because of this we created the Profinet Explorer locally... Unfortunately you can't do ...

• Afficher le commentaire
• Franziska Gültig
• 10 avril 2025 09:04
• 0 vote

1. Communauté
2. Ewon - Cosy
3. HMI in WAN erreichen

Hi Cedric! Whitch Cosy do you use exactly? Cosy+ or Cosy 131? So you are saying WAN and LAN are not seperated. There already is a Router connecting these two that is not the Cosy? You could try thi...

• Afficher le commentaire
• Franziska Gültig
• 2 avril 2025 11:33
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Wrong date and time for emails received on alarm notifications

Hello Raoul! How were these e-mail notifications created? Are you using Export block descriptor? And Were? Are you using Programming? Sheduling? Alarm Notifications? Are you exporting Historical Lo...

• Afficher le commentaire
• Franziska Gültig
• 2 avril 2025 11:24
• 0 vote

1. Communauté
2. Ewon - Cosy
3. Would EC6133G work in Brazil?

Hi Daniel! I will switch your question into a Ticket! We will get back to you on your question shortly. br Franziska Gültig

• Afficher le commentaire
• Franziska Gültig
• 24 mars 2025 12:49
• 0 vote