dstuber
- Activité totale 9
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 1
Aperçu des activités
Dernière activité effectuée par dstuber-
dstuber a ajouté un commentaire,
It is described correctly in the Ethernet IP Scanner X-Gateway Interface Addendum. I my initial research I referenced the Anybus X-Gateway User Manual, which shows a different format. So I guess ...
-
dstuber a ajouté un commentaire,
Deryck, I got the connection working by adding the IO_Info section to the EDS file, as you advised. Successfully passing IO data, control, and status words. The Livelist format is different than ...
-
dstuber a ajouté un commentaire,
Hello Again Deryck, First a little background info. I am not using RSLinx as my configuration tool. This application involves a Bosch Rexroth PPC-R22 multiaxis motion and logic controller. The P...
-
dstuber a ajouté un commentaire,
I have 4 DeviceNet EDS files in my downloads from HMS website: 324-7900-EDS_ABCC_DEV_V_2_1.eds 72-7978-EDS_ABS_DEV_V_1_35.eds 105-0440-EDS_ABC_DEV_V_1_10.eds 005A000C004A0300.eds Which one is corre...
-
dstuber a ajouté un commentaire,
Ah yes, that works! I thought I tried that before, but the first time I think I disabled the control word on the EIP side. The control word on the DeviceNet adapter side must be disabled. That m...
-
dstuber a ajouté un commentaire,
I can upload and download to the EIP scanner with ACM. As I mentioned, I do not have a master connected to the DeviceNet adapter side. I was thinking this might prevent me from putting the either...
-
dstuber a ajouté un commentaire,
When I attempt to put the EIP side in run mode from Anybus Configuration Manager. Tools > Set Operation Mode, the selection is grayed out and says " Not Available". The DeviceNet master card is on...
-
dstuber a créé une publication,
Configuration Anybus x-Gateway, DeviceNet Adapter/Ethernet IP Scanner
DeviceNet Master is not connected yet. EIP scanner network is connected with MURR Electronic EIP IO modules. Valid input data is observed. Ethernet IP LED status: GW green solid, LA green flash...