dewaldz
- Activité totale 19
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 1
Aperçu des activités
Dernière activité effectuée par dewaldz-
dewaldz a ajouté un commentaire,
So I removed the card and defined one of the builtin ports as WAN port. It made me re-add to the cloud which I did. Now, NAT on Lan (Plug'n Route) when I check this and click update, and then click...
-
dewaldz a ajouté un commentaire,
Sure. Will try and get back to you.
-
dewaldz a ajouté un commentaire,
Flexy 205. No, using expansion card for WAN port. All 4 internal ports are LAN only. Try a different firmware? Wipe and start from scratch?
-
dewaldz a ajouté un commentaire,
Here's the backup attached. Let me know what you think. Dave Ewaldz Project Engineer Martin Automatic Inc. MOVED TO STAFF NOTE (180 KB)
-
dewaldz a ajouté un commentaire,
Yes you downloaded a backup via teamviewer when you were connected. If you have lost it I can probably find it on my laptop on Monday.
-
dewaldz a ajouté un commentaire,
Ready whenever you are. I have teamviewer on my laptop.
-
dewaldz a ajouté un commentaire,
I have teamviewer installed on my laptop.
-
dewaldz a ajouté un commentaire,
Flexy 205 V13.2S1
-
dewaldz a ajouté un commentaire,
Tried that and still nothing.
-
dewaldz a ajouté un commentaire,
If I do this, do I then have to setup the Ewon as a gateway on both the PLC's and HMI's IP configurations?