Tim Beaulieu

1. Communauté
2. Ewon - Flexy
3. Modbus IO Server Modbus TCP Port configuration to when EWON is Modbus Client

It should be available in all of the Flexy devices. I'm not quite sure what firmware this was first included in, but I believe this feature has been available for a while. I think anything in the 1...

• Afficher le commentaire
• Tim Beaulieu
• 16 avril 2021 19:19
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Modbus IO Server Modbus TCP Port configuration to when EWON is Modbus Client

Adding this seemed to fix it image1366Ã615 73.3 KB

• Afficher le commentaire
• Tim Beaulieu
• 16 avril 2021 18:36
• 0 vote

1. Communauté
2. Anybus - Wireless
3. Wireless Briadge and Ethercat

Hi Dave, If you use two Wireless Bridges II OR two Bolts OR one AWB II and one Bolt in the tunnel Mode you can transfer even Broadcast Ethernet Frames. So you can also tansfer Ethercat frames. But ...

• Afficher le commentaire
• Tim Beaulieu
• 12 avril 2021 16:55
• 0 vote

1. Communauté
2. Ewon - Flexy
3. Modbus IO Server Modbus TCP Port configuration to when EWON is Modbus Client

Hi @MD_Raja, What is the LAN IP address of the Ewon device and the Modbus TCP device? Is it responding to pings? Do you have disable tags in error set on the device?     -Tim        

• Afficher le commentaire
• Tim Beaulieu
• 7 avril 2021 20:02
• 0 vote

1. Communauté
2. Intesis - AC Interfaces
3. Error in the communication of IACCC device with the AC unit

Hi Chris, I'm including the manual for the device below, can you check and make sure you have the wiring for the device correct? image808Ã430 73.3 KB cdn.hms-networks.com inw...

• Afficher le commentaire
• Tim Beaulieu
• 21 janvier 2021 16:28
• 0 vote

1. Communauté
2. Intesis - AC Interfaces
3. Error in the communication of IACCC device with the AC unit

Hi Chris, did you check that your Fujitsu device is in the list of compatible devices on the Intesis page?

• Afficher le commentaire
• Tim Beaulieu
• 20 janvier 2021 13:50
• 0 vote

1. Communauté
2. Intesis - AC Interfaces
3. Error in the communication of IACCC device with the AC unit

Hi Lam, here's a list of devices that we can guarantee we're compatible with. Unfortunately I didn't see the AOU18RLB model number in that list https://www.intesis.com/favicon_HMS.ico https://www...

• Afficher le commentaire
• Tim Beaulieu
• 14 janvier 2021 21:45
• 0 vote

1. Communauté
2. Intesis - AC Interfaces
3. Error in the communication of IACCC device with the AC unit

Hi @lvuhome, I was looking for that error code and found this page that included the error you mentioned. image837Ã507 52 KB So it looks like your device is running into issues reaching the AC un...

• Afficher le commentaire
• Tim Beaulieu
• 14 janvier 2021 21:40
• 0 vote

1. Communauté
2. Ewon - Flexy
3. MQTT connect failure

Hi @Dewy, I'm going to close this ticket out for now, but if it happens again you can still comment on this ticket. Please let me know if you run into the same issue again. -Tim    

• Afficher le commentaire
• Tim Beaulieu
• 15 décembre 2020 13:54
• 0 vote

1. Communauté
2. Ewon - Flexy
3. MQTT connect failure

That shouldn't be an issue if you're not deleting files

• Afficher le commentaire
• Tim Beaulieu
• 8 décembre 2020 19:22
• 0 vote