LabVIEW API for VCI V4 (vcilva2.dll)
Terminée
Hi,
I am using LabView 2021 with VCI V4. It works, when I run the application via the LabView Development Environment.
But when I create a runtime executable and try to run it on the target PC it misses the vcilva2.dll. Actual VCI driver is for sure installed on the target PC.
When I try to install the LabView Addon on the target PC, it quits because of a missing LabView installation.
What did I miss or do wrong?
Regards
-
Commentaire officiel
Dear Felix,
- Please deliver the executable file of your LabView application with the vcilva2.dll,
otherwise you can manually copy the vcilva2.dll from your development PC
64 Bit DLLs under 64 Bit Windows:
C:\Windows\System32\vcilva2.dll
32 Bit DLLs under 64 Bit Windows:
C:\Windows\SysWOW64\vcilva2.dll
to the directory with the executable file on the target PC with the LabView Runtime only.
- If you register in our online support tool and create a support request there
https://support.hms-networks.com/hc/en-us
then I can provide you the vcilva2.dll
Best regards
Andreas - Please deliver the executable file of your LabView application with the vcilva2.dll,
-
Dear Andreas,
thanks for this hint!
My Application is 32 Bit, and I used the wong DLL, the 64 Bit one.
Now with the correct DLL it works!
Thanks again
Felix
0 -
Dear Felix,
You are welcome!
Thank you very much for your feedback!
Best regards
Andreas0 -
Check if the target PC's environment matches your dev setup, like LabView version and dependencies. Also, maybe manually copy the vcilva2.dll to the target and see if that works.
0 -
Dear Mark,
Thank you very much for your suggestions.
The problem was solved using the 32bit DLL as you can see on the top.
Best regards
Andreas0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
5 commentaires