Profinet s2

pmhamilt

• 10 avril 2018 20:41

Do you have a solution to connect EtherNet/IP devices to a PROFINET S2 redundant controller?

I think they are asking for Single-Channel Switched. This only requires one physical RJ45 but it would allow a connection to the Primary and a Secondary connection. The firmware must determine which connection is controlling the outputs (Application Relationship, ARa or ARb).

0

• 

  robw_hms

  • 11 avril 2018 11:56

  Hello,

  The AB7670 would work for this application as the gateway interface is a Profinet Io device/slave. However there is no redundancy built into the Gateway itself.

  https://www.anybus.com/products/gateway-index/anybus-xgateway/detail/anybus-x-gateway-ethernet-ip-scanner---profinet-io-device

  Let me know if you have any questions.

  Thanks,

  Rob

  0

Vous devez vous connecter pour laisser un commentaire.