Kevin Annis
- Actividad total 105
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 39
Comentarios
Actividad reciente de Kevin Annis-
Hello, Yes. You can purchase Verizon router to provide Internet to the device via Ethernet. There are no configurations that is required beyond selecting Ethernet in the Internet Wizard.
-
Are you trying to set up the WAN side? If so, it will need to be on a different IP range and subnet than the LAN. The IP and default gateway is going to be what is required for the Cosy to have con...
-
Hello, The Intesis unit is only recieving the values from the RC. The RC is responsible for assigning the ambient temperature to the Intesis Unit. It could be an issue as the RC isn't set up correc...
-
Hello, What is the Product Number of your Intesis Unit?
-
You will need to ask Fujitsu how to enable to the sensor as the primary temperature display and reading.
-
Hello, As stated previously, the Intesis Unit is the slave. It requires the that RC provide the ambient temp value to the Intesis Unit. As outline in chapter 5 of the installation manual. 5 Ambient...
-
Hello, You are correct. It should be set as LLHH. If the Remote is set as master, you will need to reach out to the Manufacturer on how to enable the Temp sensor on the remote.
-
Hello, THe Ambient temperature must be setup with the AC unit as highlighted below: inwfifgl001r000-installation-sheet.pdf I would check the last section of the document to walk you through the pro...
-
What is the product code of the Intesis unit? Different Intesis units use various methods to acquire the ambient temperature.
-
Hello, I have not seen this kind of issue before, but i will look more in to the issue. Please let me know what Simatic says regarding the configuration of their software.