ALK
- Actividad total 85
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 1 usuario
- Votos 0
- Suscripciones 56
Comentarios
Actividad reciente de ALK-
Comentario oficial Hello Christian, I checked internally with our R&D and the AB6690-C adheres to version HTTP/1.1. I hope this information proves to be useful for you. Best regards, HMS Tech Support
-
Comentario oficial Hi Logan, if look at the 56 pin network connector header of the B40 MD0 is on pin 30 and MI1 on 53. Here's a snip from the B40 HW Design Guide:
-
Comentario oficial Hello, as I can see, you've opened a support ticket that we are already taking care of.
-
Comentario oficial Hi edma, Sorry for the late reply. In general, it's not possible to specify or even guarantee wireless signals reaching certain ranges, since it depends on so many factors.Distance certainly affect...
-
Hello Sweta, in my first post, I've tried to explain what the Diagnostic object is good for within the Anybus CompactCom object model and how to create and delete diagnostic events. If you need det...
-
Hello Gary, sorry for the late reply, your request slipped through somehow. Something must have gone wrong with the FW download, since both RUN and ERR LEDs lighting up in red means a FATAL error. ...
-
Comentario oficial Hello, in order to convert CAN bus to Modbus-TCP, I would recommend the Anybus Communicator CAN for Modbus-TCP, p/n AB7319-B.
-
Comentario oficial Dear Sweta, in the Anybus CompactCom object model, the Diagnostics Object 0x02 serves the purpose of announcing an event to the network. This may be a malfunctioning device or a value exceeding it...
-
Hello Albert, in the [Connection Manager] section, there is the "Exclusive Owner" connection with this path: "20 04 24 C5 2C 96 2C 64" wherein the 96 and 64 stand for the instance numbers (in hex) ...
-
Hi Albert, for an explicit message I/O data exchange, you'll need to use e.g. the get_attribute_single 0x0E or the set_attribute_single 0x10 services applied periodically to the Assembly Class 04, ...