Sandi
- Actividad total 8
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 1
Resumen de la actividad
Última actividad de Sandi-
Sandi hizo un comentario,
Hi Andrew, Thanks for your email. Yes, you are correct. We have a RJ 485 port/ connection available on the Combox and we intend to use that to achieve the communication via (a gateway suggested by ...
-
Sandi hizo un comentario,
Hi Kyle, Yes you are right, the Anybus should ideally be able to interface with the Modbus RS-485 port ( first preference) or the Ethernet port( which supports Modbus communication) on the Combox. ...
-
Sandi hizo un comentario,
Kyle, Thanks for your response. And yes, we might need some information on the Modbus port on Schneider's Combox, specifically we want to know if it can/does broadcast any message on receiving a co...
-
Sandi hizo un comentario,
Hi Kyle, Just wanted to follow up and see if you had any questions or any information of a product you think might be suitable for our application. Any information you can provide, will be very hel...
-
Sandi hizo un comentario,
Hi Kyle, I spoke to the generator manufacturer (Cummins) and was able to get hold of their manual. Please find the same attached. If it still doesn't answer all your questions, please do let me kn...
-
Sandi hizo un comentario,
Hi Kyle, The combox has options for serial communication ( RS-485) and Ethernet. The Auto Generator Start (AGS) component of our system is tied to the XANBUS network within other Schneider Electric...
-
Sandi creó una publicación,
Schneider Conext XW/ SCP/Combox/ AGS compatibility with CAN Communicator
We have a Schneider Conext XW inverter system configured with Schneider DAC system ( System Control Panel, COMBOX, Automatic Generator Start) that uses XANBUS and MODBUS. Our customer would like to...