David_Nolan
- Actividad total 11
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 2
Resumen de la actividad
Última actividad de David_Nolan-
David_Nolan hizo un comentario,
Thanks! You guys never let me down!
-
David_Nolan hizo un comentario,
I'm not sure we are both on the same page regarding this problem: I am not using Ignition, but rather a Unified Automation .NET library, and and was looking more for insight into how the UA server...
-
David_Nolan hizo un comentario,
the IP field in the certificate properties is 10.0.0.253. the actual IP address is the one shown in my above screenshot. the UA expert client actually connects and i can read data. so the certifica...
-
David_Nolan creó una publicación,
OPCUA Certificate Error
OK, so i am trying to connect to the OPC UA server using UA Expert. I have the server in certificate mode on the Ewon. i am ultimately able to connect to the server, but only if i ignore the below ...
-
David_Nolan hizo un comentario,
eWON TAG GENERATOR REV 6.xlsm (41.9 KB) Here is the one I am using.
-
David_Nolan hizo un comentario,
Tom, In your GENERATOR REV 5 workbook, just remove column K (the "Type" column). Then, insert two columns after BA ("FCO"), and call them "KPI", and "Type". I was able to use the generator against ...
-
David_Nolan hizo un comentario,
Deryck, I was able to get it working. Because firmware 13.2 adds a column to var lst for the KPI property, and moves the "Type" column to a different location in the table, the current tag generato...
-
David_Nolan hizo un comentario,
Edit: I was able to get it working, and have described the solution below.
-
David_Nolan hizo un comentario,
I think there is a problem using this tag generator workbook with flexy firmware version 13.2PR. I have used it successfully in firmware 13.0, but it appears the column format of the var file chang...