pmccutcheon
- Actividad total 22
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 2
Comentarios
Actividad reciente de pmccutcheon-
I'm not even at the point of going online I thought I was supposed to enter some kind of config offline first
-
it was totally unclear to me that I had to be online with the gateway (!) you need to: -have the gateway powered up -use BOOTP to set the address of the gateway -probably check in RSLINX that it ca...
-
I tried another laptop I get the exact same issue with the AUTHENTICATIOn question
-
EClipboard021391Ã654 180 KB this is the "clipped dialog box" issue pretty awkward, I can't tell what's going on, really blind here
-
EClipboard042814Ã1504 680 KB Setting the IP address on the MODBUS side was unable to set here : is there a trick? If I am supposed to use BOOTP : then the unit only lists ONE MAC address on the s...
-
Couple issues still unclear to me: -on the side of the unit it says "MAC X2" with the MAC ID --> I would guess this is talking about X2, the bottom connections -when I run BOOTP, I get this MAC...
-
re the MAC ID issue: -the text on the label of the unit says MAC X2 but I am positive it is for the Ethernet/IP side, which I would have said is network ONE (not 2) -to get the MAC of the MODBUS si...
-
okay, solved the "setting the Modbus side IP address issue" - pretty easy - just turn off DHCP in the dialog box - this allows the IP address to be set
-
this one seems minor for now, dialog box actual not matching manual version
-
so the "unreadable dialog boxes" is my main concern right now