djoneddd

  • Actividad total 18
  • Última actividad
  • Miembro desde
  • Siguiendo 0 usuarios
  • Lo siguen 0 usuarios
  • Votos 1
  • Suscripciones 7

Resumen de la actividad

Última actividad de djoneddd

  • djoneddd creó una publicación,

    Atlas2 and Ethertap network diagnostic

    1. Comunidad
    2. Anybus - Diagnostics

    Hi everyone, we have atlas2 and ethertap (100mbps) and the license for Ethernet/IP, Profinet and Modbusif we measurement of Profinet, we can see so much information like topology, detail error at r...

    • djoneddd
    • 2 seguidores
    • 1 comentario
    • 0 votos

  • djoneddd creó una publicación,

    ABC3090 - FATAL ERROR - PROFINET to MODBUS/RTU

    1. Comunidad
    2. Anybus - Gateways

    Hi Everyone, my customer have problem with ABC3090 it suddenly have fatal error it already 3x at the last week, after reboot from power it is going back normal. gateway works for 24h/7d for almost...

    • djoneddd
    • 2 seguidores
    • 1 comentario
    • 0 votos

  • djoneddd hizo un comentario,

    1. Comunidad
    2. Anybus - Diagnostics
    3. Sorting Profibus Nodes

    Hi Amir, Actually, we can add, delete or re-order position of node from "Network Manager"but for bar graph display only have option display base-on address or base-on level measurementif we delete ...

  • djoneddd hizo un comentario,

    1. Comunidad
    2. Ewon - Flexy
    3. FLEXY 205 WITH MITSUBISHI QJ71E71-100

    Update: it works fine if I connect it from Q71E71-100we just need to crosscheck the assignment IP of module, network number and station numberthe default for MC port will be: UDP=5000/5001; TCP:500...

  • djoneddd hizo un comentario,

    1. Comunidad
    2. Ewon - Flexy
    3. FLEXY 205 WITH MITSUBISHI QJ71E71-100

    Hi Franziska, Thank you for the link, i will try it next week on site, i hope it can work properlyi will update here with documentation if it works Best regards, Joned

  • djoneddd hizo un comentario,

    1. Comunidad
    2. Anybus - Gateways
    3. ABC4091 - Siemens S7-300 [profibus] with S7-1200 [profinet]

    Hi ALK, Thank you for your recomendation,After i change the address, it's working properly now Best Regards, Joned

  • djoneddd creó una publicación,

    ABC4091 - Siemens S7-300 [profibus] with S7-1200 [profinet]

    Respondida
    1. Comunidad
    2. Anybus - Gateways

    Hi everyone, I have network Profinet [S7-1200] with Profibus [S7-300], so i use ABC4091 for exchange dataFor profinet side it works fine, i can send data and can monitored from IO diagnostic on ABC...

    • djoneddd
    • 2 seguidores
    • 2 comentarios
    • 0 votos

  • djoneddd creó una publicación,

    FLEXY 205 WITH MITSUBISHI QJ71E71-100

    Completada
    1. Comunidad
    2. Ewon - Flexy

    Hi everyone, i want to pooling data from Mitsubishi Q170MSCPU [basically it was integrated cpu Q03UDCPU with motion cpu]  through QJ71E71-100 (ethernet module)But i can't found option for MC protoc...

    • djoneddd
    • 2 seguidores
    • 3 comentarios
    • 0 votos

  • djoneddd hizo un comentario,

    1. Comunidad
    2. Anybus - Diagnostics
    3. Anybus Profihub With Fiber Optic

    Hi Ralf, Thank you for the feedback,Is that mean Profihub FO only works on base network profibus not profinet?So if the network already have FO from Profinet we can't use it right?Do you have exper...

  • djoneddd creó una publicación,

    Anybus Profihub With Fiber Optic

    1. Comunidad
    2. Anybus - Diagnostics

    Hi everyone, can i use Profihub (with fiber optic) as network converter from Profibus DP to Fiber Optic Ring?for example the PLC as master connect to DP connector at profihub, and the fiber optic f...

    • djoneddd
    • 2 seguidores
    • 3 comentarios
    • 0 votos