Tim Beaulieu
- Actividad total 191
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 46
Comentarios
Actividad reciente de Tim Beaulieu-
Hi Mike, The link below should help with the update https://forum.hms-networks.com/t/updating-a-flexy-205-to-fw-13-1-to-work-with-a-4g-card/7692 @anonxvkqcjao Fixing the issue that was reported...
-
Hi Zach This work around should be able to help with what you're doing /letter_avatar_proxy/v4/letter/j/e19b73/40.png https://forum.hms-networks.com/t/ewon-cozy-setup-with-multiple-machines/5489...
-
Hi Dave, If you use two Wireless Bridges II OR two Bolts OR one AWB II and one Bolt in the tunnel Mode you can transfer even Broadcast Ethernet Frames. So you can also tansfer Ethercat frames. But ...
-
Hi @MD_Raja, What is the LAN IP address of the Ewon device and the Modbus TCP device? Is it responding to pings? Do you have disable tags in error set on the device? -Tim
-
Adding this seemed to fix it image1366Ã615 73.3 KB
-
It should be available in all of the Flexy devices. I'm not quite sure what firmware this was first included in, but I believe this feature has been available for a while. I think anything in the 1...
-
Hi Chris, I'm including the manual for the device below, can you check and make sure you have the wiring for the device correct? image808Ã430 73.3 KB cdn.hms-networks.com inw...
-
Hi @lvuhome, I was looking for that error code and found this page that included the error you mentioned. image837Ã507 52 KB So it looks like your device is running into issues reaching the AC un...
-
Hi Chris, did you check that your Fujitsu device is in the list of compatible devices on the Intesis page?
-
Hi @Dewy, Sorry for the delay, it's been pretty busy the last few days with meetings and calls. The Ewon should not be deleting any files on its own, but if this happens again please let me know an...