Zach Farmer
- Actividad total 42
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 1
- Suscripciones 14
Comentarios
Actividad reciente de Zach Farmer-
Hi, After creating the ewon profile for the device in eCatcher did you complete the VPN wizard on the cosy?
-
The device will have to be connected to the Flexy on the LAN side and in the same subnet. You cannot have any of your computer's network adapters in the same subnet as the Flexy's LAN. here is a do...
-
Hi, The Cosy 131 NA does not support Verizon since verison does not use GSM. ATT or Tmobile would work with that cosy since they use GSM for communication. If you have to use verizon then you would...
-
Hi, For security reason it is not possible to connect an Ewon device to a Talk2M account if this Ewon device is already linked to another Talk2M account. To allow the Ewon device to connect to the ...
-
Hi, If you are receiving an access denied message then the device is already registered with an account. Factory resetting does not remove it from the account. Make sure the correct device was rem...
-
Hi Brendan, From the new diagram you have sent it looks like the LAN side is going to have different subnets. That will not work with the eWon device. the must all match the 10.100.0.254/24 subnet ...
-
If you are correctly Blocking the VPN and Not Blocking WAN traffic then it will work.
-
The Ewon needs internet access and you must follow all these settings. The VPN is not accounted for since this has to do with the Local network. It will not matter if you disable the VPN as long as...
-
We have an application document document with some helpful links in it on using MQTT with the flexy. aug-0073-00-en-getting-started-with-mqtt-on-ewon-flexy.pdf We also have a broker that you ca...
-
The first script you posted looks like it just sends a message every 5 seconds that says test plus a number that iterates up. The ejemplo script checks the number of tags the Flexy has and iteracts...