Web Interface and VLANs Flexy 205

Hi,

I have been struggling with this for a long time.

 My LAN is 10.0.0.53, my WAN is 10.229.243.70.

With default installation, I can ping 10.229.243.70 and access the web UI from the 243 VLAN but not from any other VLAN.

If I set WANItfProt=2, after reboot I can still ping but no more access to the web page from any VLAN.

Of course a rule exists in the network to allow inter-VLAN traffic.

I see a NAT 1:1 rule that maps LAN (10.0.0.53) to WAN (10.229.243.70): I did not set it myself, it should be useless in my opinion. Also WAN IP Forwarding is set to 1.

How can I access the web page from VLAN 243 as well as from other VLANs in my network? Thank you