Saltar al contenido principal

Can connect in tia portal

Comentarios

1 comentario

  • Comentario oficial
    Jack O'Brien

    Hi Mark,

    The discovery function doesn't work by default through the VPN. It's best to use the PLC's IP directly as shown here:

    Why can't TIA Portal find my PLC?

    You can also use the Ewon's built-in Profinet Explorer to check/set the network settings on the PLC.

    You can enable broadcast forwarding for the discovery function to work but it's not recommended since it can consume a lot of traffic and shouldn't be left on. There are instructions here if needed:

    The VPN traffic is too high, how can I reduce the number of GB used?

Iniciar sesión para dejar un comentario.