Mert Kavaf
- Total activity 40
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 33
Articles
Votes on activity by Mert Kavaf-
Which ports and IP addresses are used for AC Cloud connectivity?
In this article, you can find the ports and IP addresses that AC Cloud uses. APPLICABLE PRODUCTS Intesis AC Cloud Control: INWFIDAI001I000, INWFIDAI001R100, INWFIFGL001I000, INWFIFGL001R...
-
How to find KNX Database File for my Intesis gateway?
This article describes how to find the relevant ETS database file for your gateway. APPLICABLE PRODUCTS AC Interfaces One-to-One KNX Gateways (INKNXUNI001I000, INKNXPAN001I000, INKNXTOS001R0...
-
Which port is used for the Ethernet Connection by Intesis MAPS
This article describes which is the port used in Intesis MAPS for Ethernet connection. APPLICABLE PRODUCTS Intesis MAPS SYMPTOM Intesis MAPS can’t detect the gateway. ANSWER In case, i...
-
I can SCAN and read Midea AC units but I can't control them.
APPLICABLE PRODUCTSIN770AIRxxx000ISSUEWhen scanning the Midea bus, the AC units can be found and read, but every command sent to the unit is reverted.POSSIBLE CAUSESThere's an XYE Extension Kit and...
-
How To Restore Intesis MAPS project password
In this article, how to restore the MAPS project password. APPLICABLE PRODUCTS All the gateway that configured via Intesis MAPS software. PRE-REQUISITES Installed Intesis MAPS. IN THIS ...
-
I can't control my Hitachi Unit but I can read the Statuses.
In this article, it is explained how to configure the Hitachi Bus to be able to control the unit. APPLICABLE PRODUCTS INKNXHIT001A000 PROBLEM It is not possible to send any command from K...
-
How To create KNX Logging with ETS 5/6?
This article will explain what ETS 5/6 is and how to create KNX logging with it. PRE-REQUISITES To have ETS 5 or 6 installed and physical connection to the KNX bus with KNX-PC Interface. ...
-
How to check the DALI compatibility with Intesis Gateway?
In this article, it is explained how to decide if your DALI device is compatible with Intesis Gateways or not. APPLICABLE PRODUCTS Intesis DALI Protocol Translators: INBACDAL0640200, IN...
-
How to solve UUID error on CAN@Net or CAN NT devices?
In this article, it is explained how to solve the UUID error on the CAN@Net or/and CAN NT devices. APPLICABLE PRODUCTS CAN@net NT 100/200/420 CAN@net II/Generic PRE-REQUISITES Using two C...
-
Is it possible to use VCI V4 with older USB-CAN versions?
In this article, it is explained if it is possible to use VCI V4 with older than USB-to-CAN Compact V2. APPLICABLE PRODUCTS USB-to-CAN Compact V1.5 IN THIS ARTICLE The USB-to-CAN com...