Mert Kavaf
- Total activity 63
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 33
Activity overview
Latest activity by Mert Kavaf-
Mert Kavaf commented,
Official comment Hello Pete, As you noticed, we are only compatible with 3-wire solutions. Most of the FJ remotes have a dipswitch inside to change the connection method from 2-wire to 3-wire, you can check that. ...
-
Mert Kavaf created an article,
I can SCAN and read Midea AC units but I can't control them.
APPLICABLE PRODUCTSIN770AIRxxx000ISSUEWhen scanning the Midea bus, the AC units can be found and read, but every command sent to the unit is reverted.POSSIBLE CAUSESThere's an XYE Extension Kit and...
-
Mert Kavaf created an article,
How To Restore Intesis MAPS project password
In this article, how to restore the MAPS project password. APPLICABLE PRODUCTS All the gateway that configured via Intesis MAPS software. PRE-REQUISITES Installed Intesis MAPS. IN THIS ...
-
Mert Kavaf commented,
Hello Felix, Do your Ewon has any special characters? (i.e "é", "á" etc.) Are you trying to access through http or htpps connection? Have you tried with different web browsers? If the ewon n...
-
Mert Kavaf commented,
Official comment Hello Tom_Duclos, The Ewon is incompatible with SSL, or Secure Sockets Layer, is an encryption-based Internet security protocol. It's the reason we provide our SMTP server relay.talk2m.com A few ye...
-
Mert Kavaf commented,
Hello Dear Mihai, The PDO mapping on the CM CANopen Manager side is done automatically and there is no default mapping. To be able to configure the slave PDOs, you need to click to the slave on th...
-
Mert Kavaf created an article,
Can't establish VPN Connection to PLC with TIA Portal
This article explains how to solve the issue when there is an Ecatcher connection without a problem, but TIA portal can't reach the PLC. APPLICABLE PRODUCTS Ewon Cosy+ / Cosy 131 Ewon Fl...
-
Mert Kavaf created an article,
I can't control my Hitachi Unit but I can read the Statuses.
In this article, it is explained how to configure the Hitachi Bus to be able to control the unit. APPLICABLE PRODUCTS INKNXHIT001A000 PROBLEM It is not possible to send any command from K...
-
Mert Kavaf created an article,
How to use MAPS configurations with the new 700-series gateways?
In this article, we show how to use configuration files with the new 700 series gateways. APPLICABLE PRODUCTS (Mandatory) 700 series gateways Legacy Protocol translators and Multi-Unit Gat...
-
Mert Kavaf created an article,
How To create KNX Logging with ETS 5/6?
This article will explain what ETS 5/6 is and how to create KNX logging with it. PRE-REQUISITES To have ETS 5 or 6 installed and physical connection to the KNX bus with KNX-PC Interface. ...