Kyle Reynolds
- Total activity 653
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 15
- Subscriptions 175
Comments
Recent activity by Kyle Reynolds-
This depends on how your network is setup. I assume you must be connecting to the Flexy through the VPN currently. If you connect locally you won't need the VPN and eCatcher. Is the Flexy on the sa...
-
Great! Glad it's working for you now. It can be easy to overlook in the manual, but now it will be on the discussion board. Thank you, Kyle
-
Make sure the OPC UA client is logging in with an eWON user for which the right "Force Outputs" has been granted. image655Ã683 31.9 KB
-
Have you checked all of the documentation for the OPC UA server? I am not very familiar with it, but it seems there is some kind of configuration missing on that side. You said the connection is go...
-
Did you tell the flexy which group of tags to publish? image723Ã447 58.1 KB
-
Here is a link to docs: https://websupport.ewon.biz/sites/default/files/aug-0064-00-en-opc-ua-server.pdf I found this example for Kepware v5.2: image558Ã841 128 KB You could also publish modbus T...
-
These settings can also be found in the UI here: In Setup System Communication Networking Routing Natltf = 2 (This sets "NAT and TF on WAN') VPNRedirect = 0 (Allows traffic outside the VPN tunn...
-
If you want to give devices on the LAN internet access you will have to change some security settings and make sure they have the eWON's address set as their gateway. Go to Setup System Storage ...
-
Please follow these instructions: DHCP Server on LAN Example: LANDHCPSEnable:1 [1=Enable, 0=Disable (default)] LANDHCPSStartIP:192.168.120.20 [Start address of DHCP pool] LANDHCPSEndIP:192.168...
-
Had a customer with verizon using wyleslte.gw7.vzwentp