Kyle Reynolds
- Total activity 682
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 17
- Subscriptions 180
Comments
Recent activity by Kyle Reynolds-
Can you try setting NAT and TF to "NAT on LAN (Plug'n Route)' and disabling NAT 1:1 as shown below, then reboot the eWON and try again? image1566Ã547 50.3 KB
-
Hey Randy, I took a look at the logs and configs and you need to make these changes: Check network settings on HMI and make sure that the default gateway is set to be the Cosy's LAN address (10.0....
-
You wouldn't want to restore a backup from a device which had already run the VPN/Talk2m Wizard, because each device has unique keys, but you could change the settings you wanted before running the...
-
Hi Randy, It's not a bad idea to restore from a backup, but you need to make the device backup before connecting to Talk2M because the devices need to have unique identities in the config files or ...
-
Those network settings can be changed if you run the Internet Wizard, top right hand corner of screen.
-
Yes, there should be a "watchdog" running that will restart the WAN port if there is no internet connection. It may actually be due to the modem. Can you try setting the IP address as static, using...
-
Randy, The logs look a lot better. Those errors are gone and the only errors since it last rebooted yesterday were a couple for unsupported S7 commands at around 2 a.m. Let me know how it goes toda...
-
Right, my mistake. Let me know when you are available, we are going to be done for today in less than an our, but will be back at 8:30 AM Estern.
-
You can just go into the Flexy and under Setup < Users, add a new user and password and send me the info. It will be kept confidential and once I'm done you can delete the account.
-
Hi Randy, About the device not connecting to the internet when first powered on, it could be an issue between the Cosy and the modem, but usually the Cosy will connect as soon as an internet connec...