Michael
- Total activity 15
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Comments
Recent activity by Michael-
@kyle_HMS SN: A03DD695 I can uninstall the existing EDS and try "generic ethernet module" I can also install the new EDS you just sent, although I think if we do generic we do not need...
-
@kyle_HMS We tried 36/28, same issue, module mismatch and won't connect. This was on RSLogix5000 version 19 and old 1768 CPU with ENBT ethernet bridge. We also saw that when we powered...
-
@kyle_HMS Now PLC says "module mismatch". Can this work with old RSLogix5000 Version 19 on an old Allen Bradley 1768 processor? I used the "generic ethernet module" per Anybus procedure hms-scm-12...
-
@kyle_HMS Okay great thanks Michael
-
@kyle_HMS Thanks, you are right, after we have setup a viable bus and verified power and resistance it worked. We did have red parameters and faults related to AutoScan Fixed Map Size and AutoScan...
-
@kyle_HMS Can't connect to DeviceNET scanner side of Gateway. Used Transport Provider. Following procedure exactly. Click to connect. Flashing LED's. Upper GW statu...
-
@kyle_HMS Okay thanks we'll try. Backing up one step, of all the "Communication Adapters" in the tree, for our AB7916 ----- do we use the "Anybus-M DEV Rev: 3.7":? Is this right, do we need any ot...
-
@kyle_HMS AB7916-F (wondering what the -F means?) Cannot connect to scanner to download DeviceNET configuration. Using Anybus Configuration Manager - DeviceNet" version 3.7.1.1. Used IPConf...
-
@kyle_HMS Just to clarify, when you say UPPER and LOWER, on mine on the side it says UpperMacID: Not AvailableLowerMacID: 00-30-11-2C-E9-BA I'm assuming the DeviceNET scanner is the upper and Ether...
-
@kyle_HMS Okay got it. Thanks! Let me try to get it going, I'll ping you if I get stuck.