pmccutcheon
- Total activity 22
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2
Comments
Recent activity by pmccutcheon-
I've been a bit picky, but it's a well packaged unit, well integrated in A-B, the documentation is pretty good, and it seems to be working
-
Hello Deryck Attached are my notes on the setup. Maybe some areas for small improvements in the manual Unit seems to be working (now have to deal with the 3rd party guy on the other end HMS EN2MB-...
-
so the "unreadable dialog boxes" is my main concern right now
-
re the MAC ID issue: -the text on the label of the unit says MAC X2 but I am positive it is for the Ethernet/IP side, which I would have said is network ONE (not 2) -to get the MAC of the MODBUS si...
-
okay, solved the "setting the Modbus side IP address issue" - pretty easy - just turn off DHCP in the dialog box - this allows the IP address to be set
-
EClipboard042814Ã1504 680 KB Setting the IP address on the MODBUS side was unable to set here : is there a trick? If I am supposed to use BOOTP : then the unit only lists ONE MAC address on the s...
-
this one seems minor for now, dialog box actual not matching manual version
-
EClipboard021391Ã654 180 KB this is the "clipped dialog box" issue pretty awkward, I can't tell what's going on, really blind here
-
Couple issues still unclear to me: -on the side of the unit it says "MAC X2" with the MAC ID --> I would guess this is talking about X2, the bottom connections -when I run BOOTP, I get this MAC...
-
it was totally unclear to me that I had to be online with the gateway (!) you need to: -have the gateway powered up -use BOOTP to set the address of the gateway -probably check in RSLINX that it ca...