Tim Beaulieu
- Total activity 191
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 46
Comments
Recent activity by Tim Beaulieu-
Hi Chris, To start with make sure the device is powered on and that you have a PC connected to one of the LAN ports of the Flexy. Next go onto eBuddy and hit the refresh button to see if the device...
-
Hi Chris, Just wanted to see if this issue was all set before I close this ticket? Thanks, Tim
-
Another issue might be caused by people not logging out when they are exiting M2Web
-
Hello, I found this information on Paid/Free+ accounts that might be causing the issue. Talk2M Free+: With a Talk2M Free+ account you are limited to a single connection to any device at any one tim...
-
Hi Mike, Sorry for the delay, I needed to find out another way to get the file into the device because the one for eBuddy wasn't working. For this one, we'll need to go onto the devices FTP. so I n...
-
Hello, Sorry if the file I sent isn't working anymore, but it looks like on the manual firmware update page, that the 13.1 firmware revision is up again: https://websupport.ewon.biz/support/product...
-
What error codes are you getting when you run the internet wizard?
-
Hey Mike, Sorry for the inconvenience, In the newest firmware coming out they are making a dropdown menu to select available APNs -Tim
-
If it is a 4G card, we'll need to update it to the 13.1 firmware version, there is an issue that causes the device to repeatedly reboot about once per minute unless this firmware is installed.
-
Hi Mike, Just to make sure, is this a 3G or 4G card? -Tim