Tim Beaulieu
- Total activity 191
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 46
Comments
Recent activity by Tim Beaulieu-
For reference if anyone else sees this post. We needed to add the D modifier to read the 32 bits. You enter the address of the first 16 bits and it will grab the following address for the remaining...
-
I think if you set it up this way you should be able to do what you're trying to do image968Ã659 39.3 KB
-
I think I have something that might be useful for you but it will end up being in Hex. Let me know if this example helps at all 32 bit hex check.txt (358 Bytes)
-
Can you try this doc and see if it helps? aug-0070-00-en-plc-discovery-through-talk2m.pdf
-
Pretty much just make sure that it can map Ip addresses that would be in the Cosy's Lan to the actual address of the PLC
-
Hi Brendan, You should be able to ping devices behind the NAT 1:1 router with an example like the one seen below. Cosy ip address: 192.168.0.1 1st PLC Mapped address 192.168.0.2 PLC actual addres...
-
Updated link for the doc: hmsnetworks.blob.core.windows.net kb-0074-00-en-average-consumption-ewon-flexy-and-extension-cards.pdf 66.48 KB
-
Hello, The flexy 205 and 201 should be more or less the same performance wise. But the difference between the 201 and the 205 can be seen below. Flexy 205 Has 2 slots that cards can be inserted Ha...
-
Yeah they should be the same
-
Are you still able to ping the Siemens PLC when you're connected to the Flexy?