mitchell.hein
- Total activity 35
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 8
Comments
Recent activity by mitchell.hein-
I just attempted to configure a second device, and I still find that I cannot establish an Internet Connection in the eWON Connection Wizard, even though we have whitelisted *.talk2m.com in our fir...
-
Yes: thank you for your help!
-
We had 20 tags out of nearly 400 which were not required on our new system, so they were undefined in the PLC. What was confusing is that even a SINGLE TAG is not defined, you get this message on e...
-
If device.api.talk2m.com wasn't whitelisted and our firewall blocked that particular access, would that cause the Internet Connection test to fail?
-
OK: here's what I have so far. I used to set up eWON 4005CD and Flexy 201 units at my desk. The wizards had no problem accessing the internet via DHCP with the WAN cable I provided. Yesterday, I tr...
-
Yes. It passes the WAN Connection, and fails the Internet connection. The weird part is that the 4005CD units never had this issue, and the Flexy 205 (with the V12.2s1 software) does.
-
As I expected, we had another system which lost the ability to establish a VNC connection this weekend. However, I dug into the issue a bit further, and determined that the eWON is NOT the issue. I...
-
Ping? Yes. We haven't lost the ONLINE status, and when we connect, we can ping the devices on the eWON's LAN. We use UDP because it is required to upload, download, and monitor our PLC and HMI at ...
-
I'm in the process now of obtaining the backup, but I don't believe it will help you. I've checked the Event Log and Real Time Log, and there are no eWON faults, warnings, or anything in the traces...
-
Hi Ashley, I'd agree that the HMI (or VNC host) would normally be the first suspect. However: First, we must consider that we've had 4 years of communication experience at 28 sites without this sit...