Randy Ayscue

  • Total activity 23
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 1

Activity overview

Latest activity by Randy Ayscue
  • Randy Ayscue commented,

    Thought I would give replying to this thread a shot even though it has been closed. We had resolved my issue some time ago but it has come up again after we changed our email provider. After our SM...

  • Randy Ayscue created a post,

    Cosy 131 power

    The specifications for the Cosy 131 show a maximum input power of 30W @ 24vdc. For a model EC61330 what would be the typical power usage?

  • Randy Ayscue commented,

    Kyle, Thanks for the info. All seems to be working now. It seems my idea of restoring a backup from the other Cosy did not work. I thought I could do this and then just change the IP addresses. How...

  • Randy Ayscue commented,

    Kyle, So I'm trying to get everything working for this Cosy installation. This is my second location replacing a Cisco router with a Cosy. The first location where I installed the Cosy is still wor...

  • Randy Ayscue commented,

    Kyle, Changing to static WAN seems to have fixed the issue with connecting to the internet without having to power cycle the Cosy. Everything seems to be working properly now. So I have just inst...

  • Randy Ayscue commented,

    Kyle, Can you point me to where these settings are in the Cosy configuration? Randy

  • Randy Ayscue commented,

    Kyle, Sounds good. I did want to follow up once more about the issue with the Cosy not connecting to the internet through the cell modem if both are powered on at the same time. Yesterday someone d...

  • Randy Ayscue commented,

    Kyle, I may have discovered my issue or part of my issue. There is a setting in the Red Lion HMI called "Comms Delay". It was set to 0 ms. The manual states in regards to this setting, "The Comms D...

  • Randy Ayscue commented,

    Let's plan on doing it in the morning if that works for you. Randy

  • Randy Ayscue commented,

    One of the issues we had with the Cisco was we were using the built in ethernet switch and devices on the LAN tended to lose connection. I'm wondering if the Cosy may have the same issue. Do you th...