Cosy 131 Wan-Lan same Ip range

jondup

August 23, 2018 15:05

I use a Ewon Cosy 131 with the same IP range on the Wan and the Lan. I got that error:
34507 ecfg-LAN and WAN IP addresses configured are conflicting.What can I do to solve this problem without changing the Lan range.

Comments

1 comment

jseanor

August 23, 2018 15:08
/u/jondup

Unfortunately there are not too many ways to get around this issue. You only have 2 options available to you.
1. Change the eWON LAN
  This option would require you to change the LAN IP address of your eWON and the devices connected to it.
2. Change the WAN network
  This option can be a bit challenging but you could change the WAN network to hand out IP addresses in a different network.
The below topic has a good writeup on this issue.

/user_avatar/forum.hms-networks.com/jseanor/40/17_2.png https://forum.hms-networks.com/t/is-there-an-issue-with-the-lan-and-wan-being-in-the-same-network/1604/3 /c/ewon-support/ewon-remote-data/10

/u/timon This is actually not going to work. By configuring both networks in the same network you are creating a network conflict. One of the few requirements for using an eWON are two very distinct networks. At its heart the eWON is a router and in order for remote access and internet access to function properly we must have two networks to route between. There are quite a few threads on hms.how that cover this issue as well. In a nutshell however it will not work. Additionally, I would highl:
0

Please sign in to leave a comment.

Comments

Didn't find what you were looking for?