By initializing the ProfiCore in ProfiTrace, the program will try to detect the baudrate automatically to start measurements.
ProfiTrace, ProfiCore (Ordercode 37020, 37021, 38022)
My ProfiTrace can't detect the baudrate automatically.
There are multiple reason for this issue:
- 6 Mbps network.
We don't know why but sometimes it just can detect with this baudrate. If this is the case you must set the baudrate manually
- A broken ProfiCore.
To check if it's broken, set the baudrate manually. In case it's still not working, it's broken.
- ProfiCore is not calibrated.
Follow the steps above but if it is working the ProfiCore must be send for calibration
In case of a broken or not calibrated ProfiCore it must be handled as RMA
It's highly recommended to calibrate your ProfiCore every year.