How to remote access Schneider M262 PLC through Ewon/Talk2M

June 12, 2024 12:18
Updated

This article explains how to connect the Schneider M262 PLC using Machine Expert Logic Builder through Ewon/Talk2M.

APPLICABLE PRODUCTS (Mandatory)

Ewon : Cosy

Ewon : Flexy

IN THIS ARTICLE

To connect the Schneider M262 PLC remotely, you need to enable the PLC discovery option in the Ewon.

For this, follow the instructions in this document.

Once the remote session is finished, it is recommended to deactivate the PLC discovery option in the Ewon to prevent Talk2M data over-consuming issues.