No Communication?
- Verify Ethernet cable connection and link status
- Check IP address and subnet match between devices [kebamerica.com]
- Confirm correct driver and port configuration
- Ping device to verify network connectivity
- Ensure drive Ethernet interface is enabled
Connection Established but No Data?
- Verify correct parameter access method (EP, SP, etc.) [hms-networks.com]
- Confirm correct parameter number and addressing
- Check data mapping and process data configuration
- Ensure correct data type (word vs long)
Intermittent or Dropped Communication?
- Check network cable quality and connectors
- Verify switch/network stability
- Check for IP conflicts
- Confirm proper grounding and shielding
Incorrect Data or Values?
- Verify correct parameter selected
- Check parameter scaling, divisor, and multiplier [hms-networks.com]
- Confirm byte/word interpretation
- Ensure correct set/index used
Write Works but No Effect?
- Use correct “Send Process Data” command to apply outputs [hms-networks.com]
- Verify parameter is writable
- Confirm correct execution sequence
- Check parameter limits (UL/LL values)
Error Codes Returned?
- Check Latest Error Code register
- Decode format: service + parameter + set + error [hms-networks.com]
- Compare error with documentation
- Correct parameter or command
Drive Not Responding Properly?
- Verify drive powered and operational
- Check parameter configuration using setup tool
- Restart drive and communication interface
- Confirm firmware compatibility
© HMS Networks AB 2025