No Communication?
- Verify Ethernet cabling and connection is secure
- Check camera has power and status indicators active [manualslib.com]
- Confirm IP address is correctly assigned
- Ensure camera and host are on same subnet
- Ping camera to verify network connectivity
Camera Connected but Not Responding?
- Verify correct IP address is being used
- Confirm camera firmware and network settings
- Restart camera and network port
- Check for IP conflicts on the network
No Image or Capture Failure?
- Verify proper lighting and positioning of camera [cybarcode.com]
- Ensure focus and lens configuration are correct
- Confirm trigger input or acquisition method is active
- Check that image capture function is enabled
Image Quality Problems?
- Adjust lighting conditions (angle, intensity, glare reduction) [cybarcode.com]
- Verify camera orientation and distance from object
- Check resolution and scaling settings
- Inspect lens for dirt or damage
Command / Control Issues?
- Verify correct command function is used
- Confirm proper data values are sent
- Ensure device number is correct
- Check that command returns success response
Configuration or Setup Issues?
- Verify AutoVISION or setup software configuration [kingbarcode.com]
- Confirm correct job or configuration is loaded
- Check communication settings match system design
Camera Not Operating Correctly?
- Verify power supply and voltage
- Check all connectors and cabling
- Restart system and reload configuration
- Confirm hardware compatibility and module type
© HMS Networks AB 2025