Please note:
PAX Lite series panel meters, example part number PAXLxxxx, do not accept option cards. Some models do have dual form C setpoint relays standard.
List of the available option cards and the PAX model numbers that will support them.
APPLICABLE PRODUCTS
- PAXCDC10- RS485 with terminal block option card.
- PAXCDC1C- RS485 with dual RJ11 option card.
- PAXCDC20- RS232 with terminal block option card.
- PAXCDC2C- RS232 with DB9 option card
- PAXCDC40- Modbus communication with terminal block option card
- PAXCDC4C- Modbus communication with dual RJ11 option card
- PAXCDL10- Analog output option card
- PAXCDS10 - Dual Form C setpoint relay card.
- PAXCDS20- Quad Form A setpoint relay card.
- PAXCDS30- Quad setpoint NPN option card.
- PAXCDS40 - Quad setpoint PNP option card.
- PAXUSB00- USB interface card for programming via Crimson 2.1 software.
- PAXCDS50 - Dual triac, dual SSR driver setpoint card.
- PAXCDS60 - Quad Form C setpoint relay card, used with units manufactured after July 2014.
PRE-REQUISITES
The above option cards can be used with the following unit models, with the noted exceptions.
- PAXCxxxx - Only setpoint option cards supported.
- PAXDxxxx
- PAXDPxxx- For Modbus communications, use PAXCDC10 and set comms type to Modbus.
- PAXHxxxx
- PAXPxxxx
- PAXIxxxx- For Modbus communications, use PAXCDC10 and set comms type to Modbus.
- PAXRxxxx- Only setpoint option cards supported
- PAXSxxxx
- PAXTxxxx
IN THIS ARTICLE
- List of available PAX series option cards
- List of PAX series model exceptions
- PAX option card product manuals
ADDITIONAL INFO
© HMS Networks AB 2025