Devices Required: IFM0001; Input signal from Encoder; Magnet Pickup, and or Frequency Generator, & Power Supply.
Terminations for the Power supply 24 Vdc:
IFM = #31 = 24Vdc
IFM = #34 = Common
IFM / Encoder Input signal
#41 = Common from Encoder
#43 = Input signal from Encoder
Programming the IFM:
Input Type = NPN
S.SUP = 17.0
Input Unit = Hz
In Lo = 1
In Hi = 4.26 KHz
Unit = Khz
Decimal = 1111 No Decimal
Disp Lo = 1
Disp Hi = 3891
Notes: You need to be able to produce the Hz range that the customer is trying to produce 4000Hz. So I used an Encoder and another device to rotate the wheel on the Encoder to simulate 4000 Hz.
The customer was using the (TACH) Input setting since they were using a Mag Pickup. After speaking with the manufacture, it was discovered that when using the (TACH) terminal you must have a Load across the terminal of 1000K Ohms. Otherwise, it will not function.
HMS Support
If you need additional assistance, please submit a request to our technical support team through the portal: