Abstract:
This configuration will allow you send SMS Messages via a device connected behind a Sixnet series SN or RAM via the serial RS232 port.
Products:
SN-6000
RAM-6000/9000
NOT SN/RAM 67xx-VZ
Software:
snpat01182016_SMS_via_TCPS_and_Serial.zip
Use Case / Problem Solved:
Allow a 3rd party device to generate SMS messages by configuring your SN/RAM device to send them. You must have SMS feature enabled on your cellular account.
Step 1. In the Web GUI, Navigate to Admin>Package Installation
Step 2. Select the snpat01182016_SMS_via_TCPS_and_Serial.zip then click Install
Step 3. Once the install is finished make sure to look in the Installation history and see that the install was a success
Step 4. Navigate to Advanced>GWLNX>Install Configuration
Step 5. Under Manage GWLNX Configuration File, select the sms-send-recv-via-serial-port.cfg file, then click Install
Step 6. Once this install is complete you connect your serial device behind us with these settings
· Baud Rate = 9600
· Data Bits = 8
· Parity = None
· Stop Bits = 1
Step 7. Once your end device is connected serially to the SN/RAM, make sure the RS232 LED is illuminated.
Step 8. Then, simply make sure the end device can format the message sent to the SN/RAM as follows
TO=4445556666 MSG=TANK IS FULL
This is the area to input the phone number, ex. 5557775555
This is the area for you SMS message, ex. TANK IS FULL!
Note: For Crimson-based devices you must set this message up as follows:
PortPrint(4,"TO=5557775555\r\nMSG=My alarm!\r\n");
Disclaimer
It is the customer's responsibility to review the advice provided herein and its applicability to the system. Red Lion makes no representation about specific knowledge of the customer's system or the specific performance of the system. Red Lion is not responsible for any damage to equipment or connected systems. The use of this document is at your own risk. Red Lion standard product warranty applies.
Red Lion Technical Support
If you have any questions or trouble contact Red Lion Technical Support by clicking here or calling 1-877-432-9908.
For more information: http://www.redlion.net/support/policies-statements/warranty-statement