Abstract

Projects in ISaGRAF 3.47 are a collection of files. To move the project from one computer archive the file as a *.pia file (similar to a *.zip file). Then to restore the *.pia file to another computer.

Products

RTU Products:

ST-IPm-8460/ST-IPm-6350/ST-IPm-2350/ST-IPm-1350/VT-IPm-1410/VT-IPm-2410/VT-mIPm-245-D/VT-mIPm-241-D/VT-mIPm-135-D/VT-mIPm-131-D/VT-IPm2m-213-D/VT-IPm2m-113-D/VT-uIPm-431-H/VT-uIPm-441-H/ST-GT-1210

Use Case: Copy, move or archive ISaGRAF projects

Required Software

Sixnet I/O Tool Kit 5.0.103

ISaGRAF 3.47

Archive the project 

1. Open ISaGRAF 3.47.
2. Go to Tools > Archive > Projects.
   1. 
3. Click on Browse and find the folder that you want copy the *.pia file to.
4. Click on Backup file to create the archived file (*.pia).
   1. 
5. User windows explorer to move the *.pia file to another computer.

Restore the project on another computer

1.  Open ISaGRAF 3.47.
2. Go to Tools > Archive> Projects
3. Go to Browse and find the file where the *.pia file was copied.
   1. 
4. Click Restore and it will be restored to the workbench.

Disclaimer

It is the customer's responsibility to review the advice provided herein and its applicability to the system. Red Lion makes no representation about specific knowledge of the customer's system or the specific performance of the system. Red Lion is not responsible for any damage to equipment or connected systems. The use of this document is at your own risk. Red Lion standard product warranty applies.

Red Lion Technical Support

If you have any questions or trouble contact Red Lion Technical Support by clicking here or calling 1-877-432-9908.

For more information: http://www.redlion.net/support/policies-statements/warranty-statement