This KB describes how to get the system log of wireless Bridge/wireless Bolt on the computer side
APPLICABLE PRODUCTS
Wireless Bridge
Wireless Bolt
PRE-REQUISITES
The Syslog server needs to be enabled on the PC
IN THIS ARTICLE
PC Settings
Open the Tftpd 64 software, select the network adapter connected to the wireless device in the Syslog server option, and record the IP address of this network adapter
Wireless Bridge/Wireless Bolt Settings
Set the Syslog server address in the wireless device and determine the input parameters by using the AT instruction description
ip_addr: ip address of the PC network adapter
udp_port:The default port is 514
protocol:Select 'Send events over Syslog', parameter is set to 4
The S register allows you to see what information is displayed in the system log
View wireless product system logs in Tftpd 64 software
Tftpd64 is a free, lightweight, opensource IPv6 ready application which includes DHCP, TFTP, DNS, SNTP and Syslog servers as well as a TFTP client Download
