In this article, we show how to use configuration files with the new 700 series gateways.
APPLICABLE PRODUCTS (Mandatory)
- 700 series gateways
- Legacy Protocol translators and Multi-Unit Gateways
Having Intesis MAPS downloaded.
IN THIS ARTICLE
- How to create a new project for the Legacy or 700 series?
- How to use legacy configuration files with the new 700 series?
- How to use 700 series configuration files with legacy gateways?
How to create a new project for the Legacy or 700 series?
While creating the project, it is possible to select the target device. Depending on the gateway, it should be selected the correct one.
How to use legacy configuration files with the new 700 series?
If you have a legacy project and want to use it with the new gateway, it is no problem at all. Intesis MAPS will automatically convert the project to a 700 series and it will be ready to send the gateway after connecting to the gateway.
If you want to convert the project without having the gateway present. It is also possible.
Just click Project-->Updated to S700 Project.
How to use 700 series configuration files with legacy gateways?
If you have created a new configuration file for the 700 series and want to use it for legacy gateways, unfortunately, it is impossible. It is necessary to create a new configuration file by selecting the legacy option as stated above.
Intesis MAPS download: MAPS | Multi Addressing Points Solution | Intesis
More information for 700 Series: Intesis novelties