Josh Holt
- Gesamtaktivitäten 4
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 1
Aktivitätsübersicht
Neueste Aktivität von Josh Holt-
Josh Holt hat einen Kommentar hinterlassen
The MD4 basically allows you to define the CAN frames by putting in what the identifier, data length, timeout, ect. The data I will be sending/receiving is limited to: To the VFD: Start Command Spe...
-
Josh Holt hat einen Kommentar hinterlassen
Hello Siobhan, Just to clarify. The Parker MD4 is essentially a PLC that uses CAN (CANopen/J1939) communications to control subsequent devices. The VFD I am trying to use utilizes ModbusTCP to comm...
-
Josh Holt hat einen Post erstellt
Using an ABX-ETNM with a Parker MD4
Hello, I am trying to source a communicator that will allow me to control a VFD (speed, start, stop, ect) using ModbusTCP with a Parker MD4 (PLC). The Parker MD4 supports communication via J1939 ...