Hugh Whitefur
- Gesamtaktivitäten 93
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 2 Benutzer
- Stimmen 1
- Abonnements 62
Kommentare
Neueste Aktivität von Hugh Whitefur-
No, this wouldn't work as the ABC3213 has a PROFINET device (slave) interface. The Wago PLC would need to have the ABC3213 added as a module via its GSD file, and then the program would need to be ...
-
No, at this time there is no support for programmatic access to values like RSSI.
-
Offizieller Kommentar After troubleshooting with achraf in a ticket, we determined the issue came from the wiring for the serial connection, with Rx and Tx wires swapped. After changing this, communication worked as it ...
-
The M2Web API can provide most of this (status, description, and custom fields). The location shown for an Ewon is based on its public IP, so for Flexy devices you could send a script command to re...
-
Can you tell us a little more about your application? What kind of data would you like to bring into Power BI? For data you see in Ecatcher like the online status of your Ewons, I recommend looking...
-
Hi Daniele, I am having trouble replicating this behavior. When I use the Ewon name registration, I've seen three outcomes based on the scenario: There's a new Ewon entry in Ecatcher with no assoc...
-
Hi Daniele, How are you configuring new Ewons? Are you using an activation key from Ecatcher and running the setup wizards on the Ewon itself, or are you using a configuration file applied via USB/...
-
Every device does have a unique serial number. An entry in Ecatcher is linked to one specific serial number, however reusing the activation key from that entry on another device will replace the Ew...
-
You will need to re-run the Talk2m wizard on the original Cosy+ using either the activation key for its entry in Ecatcher (which is now connected to the new Cosy+), or using the activation key from...
-
Just to verify, does this device have a good Internet connection, and is it online in Talk2m? For example, are you able to connect to the web interface through M2Web? Does the issue persist in diff...