Michael
- Gesamtaktivitäten 15
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 1
Aktivitätsübersicht
Neueste Aktivität von Michael-
Michael hat einen Kommentar hinterlassen
@kyle_HMS SN: A03DD695 I can uninstall the existing EDS and try "generic ethernet module" I can also install the new EDS you just sent, although I think if we do generic we do not need...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS We tried 36/28, same issue, module mismatch and won't connect. This was on RSLogix5000 version 19 and old 1768 CPU with ENBT ethernet bridge. We also saw that when we powered...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS Now PLC says "module mismatch". Can this work with old RSLogix5000 Version 19 on an old Allen Bradley 1768 processor? I used the "generic ethernet module" per Anybus procedure hms-scm-12...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS Thanks, you are right, after we have setup a viable bus and verified power and resistance it worked. We did have red parameters and faults related to AutoScan Fixed Map Size and AutoScan...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS AB7916-F (wondering what the -F means?) Cannot connect to scanner to download DeviceNET configuration. Using Anybus Configuration Manager - DeviceNet" version 3.7.1.1. Used IPConf...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS Just to clarify, when you say UPPER and LOWER, on mine on the side it says UpperMacID: Not AvailableLowerMacID: 00-30-11-2C-E9-BA I'm assuming the DeviceNET scanner is the upper and Ether...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS Okay got it. Thanks! Let me try to get it going, I'll ping you if I get stuck.
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS Some of the documentation on the HMS website (for some of the products) say that you can use RSNetWorx, BUT, probably not Gateways, probably DeviceNET masters, I saw one that looked like ...
-
Michael hat einen Kommentar hinterlassen
@kyle_HMS Thanks for the info. I tried to open a RSNetWorx devicenet network config using the Anybus Configuration Manager - DeviceNet but the file format seems to be different. RSNetWorx makes a ....
-
Michael hat einen Kommentar hinterlassen
Hi Kyle, it's a new conversation I just started off by saying "okay, :". Okay I got the "Anybus Configuration Manager - DeviceNet" version 3.7.1.1. I heard we need to buy that (hms-scm-1204-134...