Charles_UAS
- Gesamtaktivitäten 11
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 1
Aktivitätsübersicht
Neueste Aktivität von Charles_UAS-
Charles_UAS hat einen Kommentar hinterlassen
increasing maxcell time seems making the connection more stable, thanks.
-
Charles_UAS hat einen Kommentar hinterlassen
will try it. by the way, the FALLBACK function wouldn't help to maintain the connection in this case?
-
Charles_UAS hat einen Kommentar hinterlassen
image1828Ã896 113 KB captured this one, it happens during pulling the data logs
-
Charles_UAS hat einen Kommentar hinterlassen
image1186Ã427 111 KB I checked the logs, it actually shows disconnected. it is a cell type but the fallback to cable is enabled and plugged in. cable internet is good as well as 4G signals.
-
Charles_UAS hat einen Kommentar hinterlassen
agree, that makes sense, using LAN port to pin that subnet address. I was thinking to use subnet address over the cloud, it opens, but it would be the same thing if I lost the cloud. thanks, Kyle
-
Charles_UAS hat einen Kommentar hinterlassen
I will try to capture it next time when it happens
-
Charles_UAS hat einen Kommentar hinterlassen
is there any solid way to do this when you are local, rather than always over the cloud even you are in local?
-
Charles_UAS hat einen Kommentar hinterlassen
sometime while I am on the flexy config window, the window just closes then ie stops, cant open that screen again. randomly happens, why?
-
Charles_UAS hat einen Kommentar hinterlassen
hi, Kyle. I got it worked under s73400. but havent read those links. I will. thanks for help
-
Charles_UAS hat einen Post erstellt
Pulling data from siemens im151-8 pn/dp cpu
hi TIM, questions: if the ethernet port is the only communication on im151-8 cpu, which IO server I should select, S73&400 or S7200? there is an ethernet cable from PLC port to port 1 on Flexy al...