Tim Beaulieu

1. Community
2. Intesis - AC Interfaces
3. Error in the communication of IACCC device with the AC unit

Hi Lam, here's a list of devices that we can guarantee we're compatible with. Unfortunately I didn't see the AOU18RLB model number in that list https://www.intesis.com/favicon_HMS.ico https://www...

• Kommentar anzeigen
• Tim Beaulieu
• 14. Januar 2021 21:45
• 0 Stimmen

1. Community
2. Ewon - Flexy
3. Flexy 205 Tag Configuration

Here's a couple of posts that go over how to add/modify tags by going through excel/notepad in filezilla that might be helpful.   https://forum.hms-networks.com/t/record-time-ran-min-sec/20366/4 ...

• Kommentar anzeigen
• Tim Beaulieu
• 15. Januar 2020 13:19
• 0 Stimmen

1. Community
2. Ewon
3. Firmware Upgrade Transfer Error

Hi Barry, What firmware is currently on the device and what firmware are you trying to upgrade to? Also this page has a lot of FAQs that should be a good reference to follow for upgrading a device:...

• Kommentar anzeigen
• Tim Beaulieu
• 13. Januar 2020 13:19
• 0 Stimmen

1. Community
2. Ewon
3. eVCOM with a Legacy software

Hello, Just wanted to see if this was still an issue or if I can close this case, Thanks, -Tim

• Kommentar anzeigen
• Tim Beaulieu
• 6. August 2019 19:54
• 0 Stimmen

1. Community
2. Ewon
3. Record time ran min/sec

Welcome, Let me know if you have any other questions

• Kommentar anzeigen
• Tim Beaulieu
• 15. Mai 2019 17:35
• 0 Stimmen

1. Community
2. Ewon
3. Record time ran min/sec

Generally I don't recommend that people use the tag generator just because it's not something that was developed by HMS. But it is possible to do this through excel or notepad. I'd recommend going ...

• Kommentar anzeigen
• Tim Beaulieu
• 15. Mai 2019 14:11
• 0 Stimmen

1. Community
2. Ewon
3. Record time ran min/sec

Hi Lucas, I think I found a way to do this, I created a couple of int tags along with a string tag that will be combining the variables of hours, minutes and seconds. I'd probably set it up so that...

• Kommentar anzeigen
• Tim Beaulieu
• 14. Mai 2019 20:26
• 0 Stimmen

1. Community
2. Ewon
3. eVCOM with a Legacy software

Can I try and jump on teamviewer again?

• Kommentar anzeigen
• Tim Beaulieu
• 18. April 2019 12:54
• 0 Stimmen

1. Community
2. Ewon
3. eVCOM with a Legacy software

Sorry just trying to recap real quick. Are you trying to get this legacy software to connect to the COM port from eVCOM or how is it trying to read from it exactly

• Kommentar anzeigen
• Tim Beaulieu
• 17. April 2019 20:27
• 0 Stimmen

1. Community
2. Ewon
3. eVCOM with a Legacy software

That could be something we could try. Is there any way you can send us some screenshots of the possible settings you can apply?

• Kommentar anzeigen
• Tim Beaulieu
• 17. April 2019 15:47
• 0 Stimmen