HMSAB7663 , Device net Connection time out error . :NS: LED flashing
While testing with Anybus , devicenet LED indicator " "NS" red LED flashing .I also checked with Anybus hardcopy manual that came along with module . Red flashing says " Device net
Connection time out. Can you please suggest on this issues.I have total 7 XM124 modules on same Anybus AB1663. GW status LED's both are flashing with green, but didn't see error messages on hardcopy manual.
XM modules "NS" LED stays green solid which shows wiring connection correct and checked with wiring.
Note: Anybus Profibus indication working perfect and shows Online LED solid green.
Please provide solution on this issue.
-
Hello @Selva,
As you mention a Red flashing NS LED indicates there is an issue with one ore more connections timing out. This typically occurs when there is an issue with the Bus. I recommend checking over the bus and make sure it is configured to spec. Do you have 120ohms at each end of the bus? Is there 24V between 5 and 1?
The gateway status is indicating the status of the carrier board between the two network boards.
Deryck
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
1 Kommentar