Set up I/0 Tags and Alarms

mmahana

• 20. Februar 2019 20:37

I am trying to set up alarm notifications (email and/or SMS) based on I/O inputs. Are there any KB articles or how to documents on setting this up.

I am using the Flexy 201 on the latest firmware and a 3401 card.

0

• 

  Deryck Beliveau

  • 20. Februar 2019 20:40

  Hello @mmahana,
  We have videos covering alarms here: https://ewon.biz/e-learning/library/flexy/alarming

  You can also refer to chapter 7 of the user manual: https://websupport.ewon.biz/sites/default/files/um-0002-00-en-flexy-family.pdf

  Regards,
  Deryck

   

   

  0
• 

  mmahana

  • 25. Februar 2019 21:43

  thanks. I will give this a shot.

  0
• 

  mmahana

  • 26. Februar 2019 16:21

  Deryck

  Im probably overlooking it, but I'm missing the step of associating a tag with DI either on the flexy base unit or the IO card.

  0
• 

  Tim Beaulieu

  • 26. Februar 2019 16:33

  Hello,

  The diagram below should be pretty helpful for figuring out the Tag IDs for each of these

   

  

   

  ig-0030-00-flx-3402-io-8di-4ai-2do-extension-card.pdf

   

  But it should be able to be setup with the following settings as an example.

   

  

   

  The following script should also be helpful if you want to send out emails through the BASIC IDE instead:
  IO Email.txt (1.0 KB)

   

   

   

   

  0
• 

  mmahana

  • 27. Februar 2019 16:36

  Thanks Tim.

  Got it working.

  Regards,

  **MIKE MAHANA | **INS

  Application Engineering

  800.889.1461 x129 | www.industrialnetworking.com

  

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.